Gold refining machine Amalgamator introduction and the using method

Gold refining machine,alluvial gold equipment amalgamator

Advantage:

1, Beautiful appearance, stable and reliable performance

2, Energy-saving and efficient, simple and convenient operation

3, Thegold amalgamation operation mercury consumption to a minimum.

4, Indispensable in the amalgamation of gold concentrator equipment.

 

Gold amalgamator- automatic and manual discharge instructions

1, the new machine for the first time please use the advanced line in turn run for at least 5 minutes, check the operation process whether there is abnormal sound and bearing parts of any overheating, such as hair

Please stop the problem in time, find the cause of the problem, repair or contact the manufacturer for consultation. If there are no problems, you can work normally

2, open the large flange amalgamation cylinder cover, join the ball (ball number table reference data on mercury (mercury), adding dosage adjustment according to how much added material).

3, add water, water to maintain the liquid level in the midline in Amalgamation cylinder above.

4, adding materials to be processed, the amount added at a time, please refer to the above table

5. Turn off the valve and start the machine. Please adjust the running time according to the actual needs

6, Turn off the machine, put in the amalgamation cylinder connected to the lower part of the feed box, the discharging pipe to the bottom and open the cover flange, the material into the hopper will be processed.

7, Attention:Mercury (mercury)is toxic, operation must bring good rubber protective gloves and qualified gas masks, to prevent mercury volatile gas poisoning, and ensure that not touched by skin especially wound

skin.

Note: the bearing should be  oiled  one time each 8hours.